Every bass angler says they “love their rods” and then leaves them rolling around the boot, wedged under a bike or leaning against a door. If that sounds familiar, this little 2pcs wall mounted fishing rod holder clip straps set is basically a cheap insurance policy. Two compact clip-and-strap holders go on the wall, you snap the rod butts and blanks in, and suddenly your favourite setups are off the floor, organised and ready to grab when you are racing out the door for an evening session.
On the BassFishingTips.US page it is listed as “2pcs Fishing Rod Holder Fixer Clip Straps Fishing Pole Holder Compact Design Fishing Rod Fixer Wall Mounted Fishing Rod Holder” – brand BRAVMACK, origin Mainland China, colour options Blue, Green, Orange and Pink, and a pack quantity of 2 pieces. The details are shown by image rather than a long paragraph, but the theme is obvious: compact wall mounted fishing rod holder clips with straps for securing your rods safely to a wall or other flat surface.
Is it a lure? No. Is it a proper bit of fishing kit that quietly solves a lot of headaches? Absolutely. And as any of the gear nerds writing over at Bassmaster’s gear section or Field & Stream’s rod rack round-ups will tell you, rod storage is one of those boring jobs that makes a massive difference to how long your tackle actually lasts.
Why This Lure Works
Alright, it is not a lure, but you know what I mean – why this wall mounted fishing rod holder actually earns a place in your fishing life.
First up, it stops breakages. Rods are surprisingly tough when they are loaded correctly and surprisingly fragile when they are jammed across a doorway or slammed by a boot lid. Every “snap” story on r/bassfishing seems to start with “I only put it down for a second…”. With a dedicated wall mounted fishing rod holder, there is a clear home for each rod – they live clipped up, not leaning somewhere dodgy.
Secondly, it keeps things tangle-free. When rods are piled in a corner, lines and guides are constantly hooking each other. That means twisted tips, bent guides and mystery wind-knots before you have even left the house. With clip straps on the wall, each rod hangs or rests separately. You can see what is tied on, grab the one you want and get out. Outdoor Life’s fishing rod storage ideas talk about how simple vertical or horizontal racks massively cut down on pre-trip faff – this is exactly that idea in a compact, two-piece form.
Third, it saves space. The compact design means you are not building some giant rack; you are just fixing two low-profile holders to a wall, pillar or side panel. In a garage or spare room they keep rods flat against the wall; in a shed or man cave they turn dead wall space into actual storage. Articles on tiny-garage rigging, like the organisation tips from Wired2Fish’s tackle organisation guides, all hammer the same theme: use vertical and wall space, not precious floor area.
Finally, it keeps you more “ready” to fish. When everything lives in a wall mounted fishing rod holder, you end up leaving your favourite combos rigged and ready. Instead of rods stripped and hidden in a pile, you have a jig rod, a moving-bait rod and a finesse combo sitting there waiting. That is exactly how you see rods set up in tournament boats and garages when Bassmaster and Major League Fishing do their behind-the-scenes gear videos – rods stored neatly, rigged, visible and protected.
How To Fish It
You do not fish a wall mounted fishing rod holder, but how you use it will make your fishing days smoother. Think of this like a little system, not just a couple of clips.
1. Pick the right spot
Choose a solid, flat surface where your rods will be out of the way but easy to grab: a garage wall, the side of a cupboard, a shed panel or even a pillar in the man cave. Make sure the length of your longest rod can sit comfortably between the holders without the tip bashing the ceiling or floor.
2. Mount the holders at sensible spacing
The product is a 2pcs wall mounted fishing rod holder clip straps set, so the usual play is one holder for the butt section and one for the mid/upper blank. Mount the lower holder around waist height for the butt and the upper one at a height where the strap or clip will sit roughly on the mid-section of your average rod. You can adjust spacing depending on whether you prefer rods stored vertically or at a slight angle.
3. Clip and strap properly
Once fitted, slot the rod butt and blank into the clip points and tighten the strap or clasp so it holds the rod without crushing it. You want “snug”, not “strangled”. That way the rods will not roll out if the door slams, but you can still pull them free one-handed when you are late for a dawn launch.
4. Build a simple system around it
Use the wall mounted fishing rod holder as the anchor point of your little prep zone. Hang a cap, a pair of long-nose pliers and a small tackle sling nearby. If you are following the rod and reel recommendations in the Best Bass Fishing Setup guide on BassFishingTips.US, you might keep that medium-heavy jig rod, a moving-bait combo and a finesse spinning rod on this holder – always rigged the same way so grabbing “the jig rod” or “the crank rod” becomes automatic.
When To Use It
A wall mounted fishing rod holder is an “all the time” bit of kit, but there are moments where it really proves its worth.
- Before work quick sessions: When you only have an hour, you do not want to spend 20 minutes untangling rods. Having two or three combos sitting in the holder, rigged and ready, means you are actually fishing, not sorting.
- After late-night trips: Getting home shattered, you can just wipe down the rods and park them in the holder without building a mess that will annoy everyone in the house.
- During winter: Off-season storage is where rods get broken in cupboards and corners. A simple wall mounted fishing rod holder keeps them safe until spring without building a huge rack.
- In small spaces: Flat, vertical storage is a lifesaver in small garages, flats and shared spaces. You get your rod obsession out of the way without turning the place into a tackle shop.
If you read the “how to store your rods” bits hidden inside many of the best bass rod reviews, you will notice a theme: horizontal racks or vertical wall mounts are the safest way to avoid blank damage. This holder falls exactly into that camp.
Does It Actually Catch Fish?
Indirectly, yes – because it helps you fish more and stress less. The 2pcs wall mounted fishing rod holder clip straps set does not have a lip, rattle or tail, but it does a few things that contribute directly to more fish caught:
- Protects your good rods so you are not constantly swapping down to spares because something snapped in the boot.
- Keeps combos rigged and ready, so you actually take the right tools for the job rather than “whatever was not tangled”.
- Speeds up trip prep, which means more of that tiny dawn or dusk window is spent with a line in the water.
Every serious angler you see in pro-level content – whether that is a Bassmaster Elite behind-the-scenes clip or a Wired2Fish “inside my boat” video – has some sort of rod storage system. Having a basic wall mounted fishing rod holder at home is just the bank-angler version of that same idea: organised gear equals more efficient fishing.
Gear Pairing
This is one of the rare bits of kit that pairs with everything. The wall mounted fishing rod holder does not care if you are running bargain-bin combos or high-end graphite; it just wants to keep them off the deck.
That said, it is a great match for building a tidy “core quiver” like the one suggested in the site’s Best Bass Fishing Lures for Beginners article and the bass setup guide:
- A medium-heavy baitcaster for jigs, Texas rigs and frogs.
- A medium power baitcaster or spinning rod for cranks, lipless baits and moving lures.
- A medium-light to medium spinning rod for finesse presentations.
Park that core trio on this 2pcs wall mounted fishing rod holder and they are always sitting there, rigged and ready with your go-to lures. Add a decent tackle organiser like the LUSHAZER Fishing Tackle Box 148 Pieces and a spool of PE Braided Wire Fishing Line by FTK, and you have got a proper little launch station instead of a pile of loose gear.
Specs
- Product name: 2pcs Fishing Rod Holder Fixer Clip Straps Fishing Pole Holder Compact Design Fishing Rod Fixer Wall Mounted Fishing Rod Holder
- Brand name: BRAVMACK
- Type: Wall mounted fishing rod holder / fixer
- Pack quantity: 2 pieces of fishing rod holder clip straps
- Colours available: Blue 2pcs, Green 2pcs, Orange 2pcs, Pink 2pcs
- Design: Compact clip and strap style holder for wall mounting
- Intended use: Securing and organising fishing rods on walls or other flat mounting surfaces
- Brand origin: Mainland China
- Category on site: Uncategorised (rod storage accessory)
- SKU: 3256809409426295
FAQ
How many rods can this wall mounted fishing rod holder store?
The pack includes 2 pieces of rod holder clip straps. How many rods you store depends on how you space and use them, but most anglers will use one holder for the butt area and one for the blank of each rod, effectively making a simple two-point mount.
Will it work with both spinning and baitcasting rods?
Yes. The wall mounted fishing rod holder is a clip-and-strap style design, so as long as the rod butt and blank fit within the clip or strap range, it will happily hold spinning, baitcasting and even shorter travel rods.
Can I mount it in a shed or on a boat?
As long as you have a solid, flat mounting surface and fix it securely, you can use this rod holder in a shed, garage, man cave or on suitable boat panels. Just make sure you choose positions where rods will not get snagged by doors or hatches.
Does it protect rods from bending or warping?
Storing rods on a proper wall mounted fishing rod holder is far better than leaning them in a corner, because the blank is supported and not constantly under sideways stress. As with any storage, avoid bending the blank sharply and do not overtighten the straps.
Is this enough for all my rods?
The pack contains 2 holders, which is a great start for your favourite everyday rods. If you have a bigger collection, you can add more sets and build a full rack over time, keeping the rods you actually use most parked front and centre.
Final Verdict
If your rods currently live in “the pile in the corner” or “that spot in the boot where they always get in the way”, this 2pcs wall mounted fishing rod holder clip straps set is a very simple fix. It is compact, it looks neat in whatever colour you choose, and it turns wasted wall space into a proper little rod rack for your favourite setups.
You will break fewer rods, spend less time untangling line, and actually get out the door faster when the conditions suddenly line up and you fancy a quick bass session. It is not glamorous tackle, but it might quietly be one of the best value bits of gear in your whole setup.
Screw in a couple of these holders, park your best rods properly and start treating your gear like you actually want it to last more than one season.
Real customer reviews