Laser Minnow Fishing Lure – 9cm, 7–8g Sinking Hard Bait With Feather Hook For Bass And Pike

If you like minnow baits that cast a mile and track like a proper little baitfish, this laser minnow fishing lure is right up your street. Sold as “Laser Minnow Fishing Lure 10/5Pcs Artificial Bionic 9cm/7g Swing Hard Bait With Feather Tackle Hook Wobbler Pesca For Bass Pike”, it is a 9 cm sinking hardbait with a slim ABS body, flashy laser-style finish, 3D eyes and a feathered rear treble that just begs to be twitched through that 0.5–1.5 m zone.

On the product page you get proper specs instead of vague waffle: brand is FFLYBG, model is a Minnow Lure, lure type is a hard fishing lure, length is 9 cm, diving depth is 0.5–1.5 m, buoyancy is sinking, and the item specifics list a weight of 7 g while the product details call out 8 g – so real-world you are looking at roughly the 7–8 g mark. Internally it carries stainless steel balls for casting distance and balance, plus stronger double split rings and high-carbon steel treble hooks. The laser-style fish skin and 10 colour options round it out as a proper little “does a bit of everything” minnow for bass and pike.

You can buy it in random 5- or 10-piece packs, so the laser minnow fishing lure is very much “chuck it where it needs to go, not where you are scared to lose it” tackle – which is exactly what you want from a workhorse hardbait.

Why This Lure Works

The laser minnow fishing lure works because it ticks the big three boxes that every good hard minnow should: profile, action and depth. At 9 cm it sits squarely in that “perfect mouthful” range that Outdoor Life’s writers keep banging on about when they talk through the best bass lures – not so big it scares fish, not so small it feels like a waste of a cast.

The slim ABS body and small diving lip give you a tight, darting action rather than a big wide wobble. On a straight retrieve it swims with a subtle shimmy, but when you start adding rod twitches it behaves much more like a classic hard jerkbait – kick to the side, pause, then slide forward again. Wired2Fish’s jerkbait how-to talks about matching baitfish size and running depth, and this sits perfectly in that shallow to mid-depth window where a lot of real bait lives.

Then you have the “laser” part: the simulated fish-skin finish and 3D eyes. In clear or lightly stained water, that flash on the sides and a feathered rear hook can be all it takes to sell the illusion. The feather dressing breathes even when the laser minnow fishing lure is sitting still, which is exactly what you want when you pause it over a piece of cover.

Inside the body, stainless steel balls pull double duty. They shift to the tail on the cast so you can absolutely sling this thing, then roll forward on the retrieve to stabilise the swim. That sort of weight-transfer idea is the same principle talked about in tackle reviews like Wired2Fish’s Hardcore Minnow piece, where extra casting distance is a big deal when you are trying to cover banks efficiently.

How To Fish It

The laser minnow fishing lure is essentially a sinking hard minnow/jerkbait, so you can fish it like a cross between a small crank and a jerkbait. It is not difficult – you just need to pay attention to depth and cadence.

1. Count it down, then straight retrieve

Start simple. Cast as far as you comfortably can, close the bail and give it a second or two to sink. Then:

• Wind at a steady, medium pace to get it down and tracking.
• Feel for that tight “hunting” vibration through the rod tip.
• If you tick rock or brush, give the handle a half-turn pause to let it glide and sink a touch, then carry on.

This is your bread-and-butter way to fish any minnow bait – cast, count, retrieve – and it mirrors the “keep it simple first” advice you will hear in jerkbait videos from places like Wired2Fish’s jerkbait masterclass.

2. Jerk–jerk–pause like a classic jerkbait

Where the laser minnow fishing lure really shines is when you treat it like a true jerkbait in that 0.5–1.5 m band:

• Make a long cast and count it down to the depth you want.
• Give the reel a few cranks to get it working.
• Then work a cadence of “jerk, jerk, pause” on semi-slack line.
• Pause length depends on water temp – colder water, longer pauses.

Pieces like Field & Stream’s guide to fishing jerkbaits for bass and even Whiskey Riff’s recent top bass lure article all talk about how important that pause is. The laser minnow’s sinking nature means it drifts down subtly in the water column during the pause, which is often when a fish sneaks in and just loads the line.

3. Sweep and glide over grass

Over shallow grass or weed-tops, use more sweeps than sharp jerks:

• Cast past the edge of the grass.
• Point the rod tip down and give it a long, smooth pull to make the lure dive and glide.
• Follow with a bit of slack so it can kick and sink, then repeat.

You are trying to walk it just above the canopy. If you feel it catching, raise the rod tip or speed up slightly to keep the laser minnow fishing lure out of the worst of it.

4. Mix it with other lures

On days when you are working through a bunch of different lure styles, this fits neatly between cranks and soft plastics. You might use a squarebill or lipless crank to locate fish, then pick up the laser minnow fishing lure to slow down slightly and pick off the more cautious ones – a trick you will see mentioned a lot in jerkbait-for-every-season style articles from Bassmaster.

When To Use It

The beauty of a sinking minnow like this is that it is not a one-season diva. The laser minnow fishing lure will catch fish from early spring right through to late autumn if you tweak how you fish it.

• Spring: As fish push up from winter haunts, jerkbaits really come into their own. Prespawn bass sitting off points, channel swings and secondary breaks are absolutely primed for a 9 cm minnow drifting and darting in front of them.
• Summer: Early and late in the day, run it along shaded banks, over weed edges and around docks. Midday, target shade lines and deeper rock where a bit of flash and a pause can trigger reaction bites.
• Autumn: When they are chasing bait, a laser minnow fishing lure is a great way to match those 3–4 inch shad or baitfish without going super tiny.

Clarity-wise, it is happiest in clear to lightly stained water, where the laser finish, 3D eyes and feathered hook can actually be seen. On proper chocolate-milk days, you might lean more on loud vibration baits, but even then, a minnow sliding past their nose can still pick up a few bites if you put it tight to cover.

Does It Actually Catch Fish?

You do not see hard minnows and jerkbaits popping up in so many “best bass lure” lists for nothing. Outdoor Life call them out specifically in their best bass lures feature, and Bassmaster have multiple pieces explaining why certain pros basically live with a jerkbait rod on the deck. They imitate baitfish better than almost anything else.

This particular laser minnow fishing lure has all the right ingredients to be more than just another pretty face on a product page:

• 9 cm length – prime bite-sized baitfish imitation.
• Approx. 7–8 g weight – easy casting on normal bass tackle.
• Sinking body – you can reach 0.5–1.5 m and play with depth on the pause.
• 3D eyes, laser skin and feathered rear treble – all the little confidence-boosting details.
• Internal stainless balls – better casting and a bit of knock in the body.

Although it is billed as a bass and pike lure, you can fully expect other predators to have a go – zander, walleye, big perch, even the odd saltwater fish around harbours and estuaries if you fancy giving it a swim in brackish water. Just rinse it after salt missions and keep an eye on the hooks.

Gear Pairing

You do not need anything exotic to fish the laser minnow fishing lure, but a sensible jerkbait-style combo makes life easier.

• Rod: A 6’6″–7′ medium or medium-light rod with a fast or moderate-fast tip is spot on. You want enough crispness for the twitches, but enough give so you do not rip trebles out.
• Reel: A baitcaster in the 6.3:1–7.3:1 range or a 2500-size spinning reel both work. Pick whichever you are most comfortable twitching all day.
• Line: 10–12 lb fluorocarbon is a good starting point for jerkbait work, or braid to fluoro if you like the extra sensitivity.

If you are still sorting a general-purpose bass combo and do not want to overthink it, have a look at the Best Bass Fishing Lures For Beginners guide on the site – it gives you a solid overall picture of how minnow baits like this fit into the bigger lure mix.

Specs

• Product name: Laser Minnow Fishing Lure 10/5Pcs Artificial Bionic 9cm/7g Swing Hard Bait With Feather Tackle Hook Wobbler Pesca For Bass Pike
• Brand: FFLYBG
• Model: Minnow Lure
• Category: Fishing Lures > Hardbaits > Crankbaits
• Lure type: Hard minnow / jerkbait-style sinking wobbler
• Length: 9 cm
• Weight: Listed as 7 g in item specifics and 8 g in product details (approx. 7–8 g class)
• Buoyancy: Sinking
• Diving depth: 0.5–1.5 m
• Material: ABS hard plastic
• Hooks: High carbon steel treble hooks, rear feather dressing
• Eyes: 3D fish eyes
• Finish: Simulation fish skin (laser) body
• Internal weight: Stainless steel balls for balance and long casting
• Rings: Stronger double-circle split rings
• Colours: 10 colours
• Pack options: Random colours 5 pcs or 10 pcs
• Origin: Mainland China

FAQ

Final Verdict

If you want a hardbait that can pull double duty as a long-casting crank and a proper jerkbait, this laser minnow fishing lure is a cracking bit of kit. The 9 cm profile, roughly 7–8 g weight, sinking body and 0.5–1.5 m running depth put it bang in the middle of where a lot of real bait lives, and the laser finish plus feathered hook just make it look that little bit more “alive”.

It is the sort of lure you can tie on, point at a decent stretch of bank and just get on with it: chuck, count it down, twitch, pause, repeat. Bass, pike and whatever else swims past will do the rest.

Load a handful of these laser minnows into the box, twitch them down the bank and be ready for that sudden thump when a fish decides it has seen enough.